S-One Helmet Lifer Visor Maroon Matte (AUS/NZ Certified)
This is S1 Lifer Helmet W/ Visor Gen 2. This is the second edition of this product and has been completely redesigned from the original version. Each helmet will come with a carrying bag, mounting hardware, a micro fiber cloth, 4 rubber safety screw covers, 1 clear Visor and three top pads in varying thickness's to affect how deep or shallow you want the helmet to sit on your head.
S1 Lifer Helmet w/ Visor Specs
• ASTM 1492 Certified for Multiple Low Force Impacts
• CPSC 1203 Certified for Single High Impacts
• CE EN 1078 Certified (European Impact Certification)
• AUS/NZS 2063:2008 Certified (Australian/New Zealand Impact Certification)
• High Impact Polycarbonate to Prevent Shattering on Impact
• Optically Correct Lens
• Anti-Fog Coating on inside of Visor to help prevent fogging
• Anti-Scratch Coating on the Outside of the Visor to help prevent minor scratches and nicks
• Patented "Cover Catcher" to allow for Multiple Helmet Covers to be worn with easy on off
• In Mold Mounting Hardware so that the Visor can be removed and replaced if needed
• Rubber Safety Screw Covers
Patent # 62/375.861
The S1 Lifer Helmet is one of the best fitting and safest helmets for Skateboarding, Longboarding, BMX, Scootering, Roller Skating and Roller Derby. The Lifer Helmet uses a specially formulated EPS Fusion Foam which allows it to protect your head from multiple low force impacts as well as high impacts. The Lifer Helmet is a certified "multi-impact" helmet and is up to 5x more protective than the soft foam non-certified helmets. The Lifer helmet is a break through design combining the added safety of a CPSC and ASTM certified helmet with the comfort and fit of a non-certified helmet. The S1 Lifer Helmet is the best fitting High impact and Multiple Impact helmet on the market.
How to measure your head (S1 Certified Helmet Sizing Guide)
Measuring your head is very helpful to figure out what size Lifer Helmet you will need. It is easiest to do this with a soft measuring tape but if you do not have one you can use a string or a cell phone charging cable and then measure that against a ruler or hard measuring tape. You need to measure your heads circumference and will want to wrap the measuring tape starting in the middle of your forehead and just above your eye brows, then around your head above your ears and back around your head to the middle of your forehead where you started. Put simply you want to measure your head where your hat would normally sit or where you would imagine the helmet to fit on your head just above your eye brows. Once you get your measurement compare it to the sizing charts on the individual Lifer Helmet product pages to see which Lifer will fit you.
If your head measures 18.5 – 20.5″ check out the S1 Mini Lifer Helmet.
If your head measures 20.5″ – 23.5″ check out the S1 Lifer Helmet
If your head measures 23.” – 25.5″ check out the S1 Mega Lifer Helmet.
And if you are ordering a helmet for someone as a gift it is always a good idea to order a FIT ALL KIT to help the helmet fit perfectly. The Fit All Kit comes with 7 different sizing liners of varying thickness.
Why make sure your helmet fits? for BMX, Scooter and Skateboard riders concussion based injuries and head trauma are very common, assuring your helmet fits the best it possibly can will assure the most protection possible and assist in mitigating head trauma and concussions.